System Security; Bios Password Protection - Intel S1200SPL Technical Spesification

Intel® Server Board S1200SP Family Technical Product Specification
4

System Security

4.1 BIOS Password Protection

The BIOS uses passwords to prevent unauthorized tampering with the server setup. Passwords can restrict
entry to the BIOS Setup, restrict use of the Boot Popup menu, and suppress automatic USB device reordering.
There is also an option to require a Power On password entry in order to boot the system. If the Power On
Password function is enabled in Setup, the BIOS will halt early in POST to request a password before
continuing POST.
Both Administrator and User passwords are supported by the BIOS. An Administrator password must be
installed in order to set the User password. The maximum length of a password is 14 characters. A password
can have alphanumeric (a-z, A-Z, 0-9) characters and it is case sensitive. Certain special characters are also
allowed, from the following set:
! @ # $ % ^ & * ( ) - _ + = ?
The Administrator and User passwords must be different from each other. An error message will be displayed
if there is an attempt to enter the same password for one as for the other.
The use of Strong Passwords is encouraged, but not required. In order to meet the criteria for a Strong
Password, the password entered must be at least 8 characters in length, and must include at least one each of
alphabetic, numeric, and special characters. If a weak password is entered, a popup warning message will be
displayed, although the weak password will be accepted.
Once set, a password can be cleared by changing it to a null string. This requires the Administrator password,
and must be done through BIOS Setup or other explicit means of changing the passwords. Clearing the
Administrator password will also clear the User password.
Alternatively, the passwords can be cleared by using the Password Clear jumper if necessary. Resetting the
BIOS configuration settings to default values (by any method) has no effect on the Administrator and User
passwords.
Entering the User password allows the user to modify only the System Time and System Date in the Setup
Main screen. Other setup fields can be modified only if the Administrator password has been entered. If any
password is set, a password is required to enter the BIOS setup.
The Administrator has control over all fields in the BIOS setup, including the ability to clear the User password
and the Administrator password.
It is strongly recommended that at least an Administrator Password be set, since not having set a password
gives everyone who boots the system the equivalent of administrative access. Unless an Administrator
password is installed, any User can go into Setup and change BIOS settings at will.
In addition to restricting access to most Setup fields to viewing only when a User password is entered, defining
a User password imposes restrictions on booting the system. In order to simply boot in the defined boot order,
no password is required. However, the F6 Boot popup prompts for a password, and can only be used with the
Administrator password. Also, when a User password is defined, it suppresses the USB Reordering that occurs,
33