Processor Integrated I/O Module (Iio); Intel Integrated Raid Option - Intel S1200SPL Technical Spesification

Intel® Server Board S1200SP Family Technical Product Specification
Data/Data Strobe timing training on a memory channel, the BIOS emits a beep code and displays POST
Diagnostic LED code 0xEA momentarily during the beeping. If there is usable memory in the system on
the other channel, POST memory initialization continues. Otherwise, the system beeps and halts with
POST Diagnostic LED code 0xEA staying displayed.
0x54/0xEB – Memory Test Error: If a DDR4 DIMM or a set of DDR4 DIMMs on the same memory channel
•
fails memory testing but usable memory remains available, the BIOS emits a beep code and displays POST
Diagnostic LED code 0xEB momentarily during the beeping, then continues POST. If all of the memory fails
memory testing, then system memory error code 0xE8 (No Usable Memory) as described above.
0xED – Population Error or Invalid DIMM: If the installed memory contains an invalid DIMM configuration
•
on either channel in the system, the system beeps and halts with POST Diagnostic LED code 0xED. The
DIMM are installed incorrectly, not following the Fill Farthest First rule (Slot 2 must be filled before Slot 1).
This will result in a DIMM Population Error, with a Memory Error Halt 0xED.
3.3.4

Processor Integrated I/O Module (IIO)

The processor's integrated I/O module provides features traditionally supported through chipset components.
The integrated I/O module provides the following features:
PCI Express* Interfaces

The integrated I/O module incorporates the PCI Express* interface and supports up to 16 lanes of PCI
Express*. Following are key attributes of the PCI Express* interface:
Gen3 speeds at 8 GT/s (no 8b/10b encoding)
-
Can operate at 2.5 GT/s, 5 GT/s, or 8 GT/s
-
The Intel ® Server Board S1200SPL and Intel® Server Board S1200SPS support PCIe* slots:
Slot 6: PCI Express* Gen3 x8 electrical with x16 physical connector, from processor.
-
Slot 5: PCI Express* Gen3 x4 electrical with x8 physical connector, from PCH.
-
Slot 4: PCI Express* Gen3 x8 electrical with x8 physical connector, from processor.
-
The Intel® Server Board S1200SPO supports PCIe slot:
Slot 6: PCI Express* Gen3 x8 electrical with x16 physical connector, from processor.
-
Direct Media Interface (DMI)

Direct Media Interface (DMI) connects the processor and the PCH. DMI2.0 is supported.
Note: Only DMI Gen3 x4 configuration is supported.
DMI 2.0 support
-
Compliant to Direct Media Interface Second Generation (DMI2).
-
Four lanes in each direction.
-
8 GT/s point-to-point DMI interface to PCH is supported.
-
®
3.3.5 Intel
The Intel ® Server Board S1200SPL and S1200SPO provide a SAS/ROC Mezzanine slot (J4J1) to a high density
80-pin connector labeled SAS_MOD for the installation of an optional Intel
Features of this option include:
22
Integrated RAID Option
® Integrated RAID Module.