Platform Management Functional Overview; Baseboard Management Controller (Bmc) Firmware Feature Support; Ipmi 2.0 Features - Intel S1200SPL Technical Spesification

Intel® Server Board S1200SP Family Technical Product Specification
6

Platform Management Functional Overview

Platform management functionality is supported by several hardware and software components integrated
on the server board that work together to control system functions, monitor and report system health, and
control various thermal and performance features in order to maintain (when possible) server functionality in
the event of component failure and/or environmentally stressed conditions.
This chapter provides a high level overview of the platform management features and functionality
implemented on the server board. For more in depth and design level Platform Management information, refer
to the BMC Core Firmware External Product Specification (EPS) and BIOS Core External Product Specification
(EPS) for Intel Server products based on the Intel
®
6.1 Baseboard Management Controller (BMC) Firmware Feature
Support
The following sections outline features that the integrated BMC firmware can support. Support or utilization
for some features is dependent on the server platform in which the server board is integrated and any
additional system level components and options that may be installed.
6.1.1

IPMI 2.0 Features

Baseboard management controller (BMC)
•
IPMI Watchdog timer
•
Messaging support, including command bridging and user/session support
•
Chassis device functionality, including power/reset control and BIOS boot flags support
•
Event receiver device: The BMC receives and processes events from other platform subsystems.
•
Field Replaceable Unit (FRU) inventory device functionality: The BMC supports access to system FRU
•
devices using IPMI FRU commands.
System Event Log (SEL) device functionality: The BMC supports and provides access to a SEL.
•
Sensor Data Record (SDR) repository device functionality: The BMC supports storage and access of system
•
SDRs.
Sensor device and sensor scanning/monitoring: The BMC provides IPMI management of sensors. It polls
•
sensors to monitor and report system health.
IPMI interfaces
•
Host interfaces including system management software (SMS) with receive message queue support,
-
and server management mode (SMM)
IPMB interface
-
LAN interface that supports the IPMI-over-LAN protocol Remote Management Control Protocol
-
(RMCP, RMCP+)
Serial-over-LAN (SOL)
•
ACPI state synchronization: The BMC tracks ACPI state changes that are provided by the BIOS.
•
BMC self-test: The BMC performs initialization and run-time self-tests and makes results available to
•
external entities.
See also the Intelligent Platform Management Interface Specification Second Generation v2.0.
42
Xeon processor E3-1200 V5 and V6 product family.
® ®