System Configuration 1 - Omron V680-HS63 User Manual

System Configuration 1

The system configuration is shown in the following figure.
FL Remote Master Unit
V680-HAM42-FRT
FL Remote ID
V680 Series Antennas
V680 Series RF Tags
■ Configuration Description
Name
FL Remote Master
Hub
Cable
FL Remote ID
Hub
Cable length:
100 m max.
V680-HAM42-FRT
OMRON
DEV TR 8 7 6 5
RMT NORM/ERR 4 3 2 1
NODE No. MODE
0 0 0
1 0
X10 X10
OFF
SOURCE : 24VDC 0.3A FSM RFID
OMRON Corporation MADE IN JAPAN
Use a JTEKT PLC that is compatible with the FL Remote for the FL Remote Master. Also use a pro-
gramming tool that is compatible with the FL Remote Master. Contact JTEKT for product details.
Use the JTEKT FE-SWH05/08.
Use the communications cable for FL Remote (category 5 or higher, with shield).
Use straight cables between Hubs and FL Remote IDs. Use a cross cable when connecting the FL
Remote Master and FL Remote ID directly.
Up to 64 FL Remote ID Units can be connected. The V680 Series Antenna can be connected to com-
municate with V680 Series RF Tags. Before use, check the restrictions on FL Remote Master Unit.
20 Units max.
Hub
Cable length:
100 m max.
64 Units max.
V680-HAM42-FRT
OMRON
DEV TR 8 7 6 5
RMT NORM/ERR 4 3 2 1
NODE No. MODE
0 0 0
1 0
X10 X10
OFF
SOURCE : 24VDC 0.3A FSM RFID
OMRON Corporation MADE IN JAPAN
Description
SECTION 1
Product Overview
Hub
V680-HAM42-FRT
OMRON
DEV TR 8 7 6 5
RMT NORM/ERR 4 3 2 1
NODE No. MODE
0 0 0
1 0
X10 X10
OFF
SOURCE : 24VDC 0.3A FSM RFID
OMRON Corporation MADE IN JAPAN
RFID System
User's Manual
21