Installing Antennas - Omron V680-HS63 User Manual

Installing Antennas

V680-HS51
Install the Antenna using the nuts and toothed washer that are provided on both sides of the mounting
material, as shown in the diagram below.
Securely tighten the screws to a torque of 6 N·m.
V680-HS52
Install the Antenna using the nuts and toothed washer that are provided on both sides of the mounting
material, as shown in the diagram below.
When the Antenna is mounted to a metallic material, the communications range will be reduced by approximately 10%
compared with mounting to a non-metallic material. For details on the effect of metal surrounding the Antenna, refer to
Effect of Surrounding Metals on the Antenna (Reference).
p.139
Securely tighten the screws to a torque of 40 N·m.
Mounting Hole
Dimensions
+0.5
12 dia.
Toothed washer
0
Mounting Hole
Dimensions
+0.5
22 dia.
0
Toothed washers
Installation, Connections, and Wiring
Metallic material
Nuts
Antenna
Non-metallic material
Nuts
Antenna
SECTION 2
RFID System
31
User's Manual