Using the Camera Control
If the far/near site camera has the PTZ function, you can control the camera.
Idle condition of the near site camera
1. Press
on the remote control. The control icon is displayed on the screen.
ll
2. You can control near site camera by pressing CAM ZOOM +, CAM ZOOM - and Arrow buttons.
3. Press OK to save the settings.
During the call
1. Select the site window using the arrow buttons.
2. Press OK on the remote control.
3. You can control the selected site camera by pressing CAM ZOOM +, CAM ZOOM - and Arrow buttons.
4. Press OK to save the settings.
Using Preset function
If the site camera has the PTZ function or another video source, you can use the preset function.
To register the preset position
1. Control the site camera to the location as you want using the CAM ZOOM +, CAM ZOOM - and Arrow buttons. Press OK.
Before you start the preset setting, you should select the site you want to set the preset during the call.
2. Press PRESET on the remote control. The preset window is displyed.
3. Select the preset number you want to save using the left or right arrow button.
4. Press OK to save the preset.
5. Press BACK to exit the preset setting.
or
1. Press PRESET on the remote control. The preset window is displayed.
2. Select the [Select Site] icon and press OK. Select the site you want to set the preset.
3. Select the preset number you want to save using the left or right arrow button.
4. Press
on the remote control. The control icon is displayed on the screen.
l
5. Control the site camera to the location as you want using the CAM ZOOM +, CAM ZOOM - and Arrow buttons.
6. Press OK. Then you will be able to save the location at that number.
7. Press BACK to exit the preset setting.
To use the preset
You can control the site camera to the saved location by selecting the saved number.
1. Press PRESET on the remote control. The preset window is displayed.
2. Select the preset number and press OK. The camera move to the saved location.
Operation
57
4