Viewing Call Information 4 - LG V5000 Owner's Manual

4. During a call, press LAYOUT button to display the layout with presentation select window.
• The single point call with presentation layout window.
• The multi-point call with presentation layout window.
Viewing Call Information
You can view the call information.
1. During a call, press (INFO).
The current call information window is displayed on the screen.
• Call Protocol: Shows the call protocol.
• Resolution: Shows the resolution, in pixels, of the video image transmitted or received.
• Video Frame Rate: Shows the video frame rate in frames per second.
• Video/Audio Codec: Shows the Video/Audio codec used to compress and decompress the Video/Audio.
• Video Packet loss/Audio Packet loss: Shows the number of packets of data that fail to reach their destination. Packet loss can be caused
by a number of factors, including signal degradation over the network medium, oversaturated network links, corrupted packets rejected
in-transit, faulty networking hardware, maligned system drivers or network applications, or normal routing routines.
• Video/Audio jitter: Shows the variation, in milliseconds, in the time between packets arriving, caused by network congestion, timing
drift, or route changes.
• Video/Audio BW: Shows the amount of Video/Audio data transferred per second in kilobits.
• Cumulative: Shows the up to date count of packets lost in the call.
• Percentage: Shows packet loss as a percentage of the total packets sent.
2. Press BACK to exit.
NOTE
Call information automatically refreshes every 1 seconds.
Get the Snapshot
During a call, you can get a snapshot of the current video image. It will be displayed in the entry of the Call History list.
Select the far end video window which you want and then press to take a snapshot.
ll
Operation 53
4