LG V5000 Owner's Manual page 5

• Main blocking device of power supply is power cord, this blocking device must be in a location that can be easily manipulated. The
product is connected to AC wall power, the switch is turned off when AC power is not completely blocked. Disconnecting the power
supply should be '0 ' power consumption.
• The product has been dropped or the case is broken, turn off the power and unplug the power cord.
- This may cause fire or electric shock. Please contact Service center.
• If the product has no video out or sound, please stop using. Unplug the power cable immediately and contact the service center.
-
This may cause fire or electric shock.
CAUTION
Please beware of the following precautions before installing the VCS.
• Keep the system turned off before installation.
• Keep the product away from electric sparks or magnetic substances.
• Avoid temperature extremes. (Recommended operating temperature is between 0 °C and 40 °C)
• Ensure enough space is left for cable connections.
• Place the system on a solid surface with sufficient air ventilation. Avoid any surface that vibrates.
• Placing the system near electronic devices such as a radio may cause the product to breakdown.
• Prevent any substances from being inserted into the system.
-
This may cause system breakdown.
• Do not install the system in a place with high magnetic, electric wave, or wireless devices such as a radio.
- Do not install the system in a place with magnetic objects, electric frequencies, or vibration.
• Do not place any heavy object on the system.
-
This may cause system breakdown.
• Install the system on a stable, level surface.
- The system may not operate properly.
• Install the system in a place with appropriate moisture and temperature levels.
- Avoid installing the system in a place with high (over 40 °C) or low (under 0 °C) temperature.
• The system can be damaged from a strong impact or vibration. Avoid throwing objects within the vicinity of the system.
• Avoid direct sunlight or any heating appliances.
• Ventilate the air inside the system operation room, and tighten the system cover firmly.
- System breakdown may be caused by an inappropriate environment. It is recommended to use AVR (Automatic Voltage Regulator)
for a stable power supply. It is recommended to coil the core-ferrite around the connector of the system to avoid electromagnetic
interference.
• The outlet must be placed on the ground.
• If there is strange sound or smell, unplug the power cable immediately and contact the service center.
-
This may cause fire or electric shock.
• In order to maintain stable system performance, have your system checked regularly by the service center.
- LG Electronics is not held responsible for system breakdown caused by user mishandling.
- There is a risk of explosion if a battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
• Do not overturn the product during use.
• Do not use or place near flammable materials.
- This may cause explosion or fire.
• If you use only a specific screen for a long time, it may remain badly damaged. Use a screen saver mode.
• The device as business type EMC Equipment (A grade), the seller or the user should be operated outside of the home is intended to be
used in.
Safety Information 5
1