User Settings; General - LG V5000 Owner's Manual

User Settings

General

• System Name: Enter a system name using up to 127 characters. The inputted system name is displayed on the main screen.
1. Press OK.
2. Edit the system name using the virtual keyboard or remote control.
3. Press OK to confirm the setting.
NOTE
If you connect a SIP call, you have to enter alphanumeric.
If you enter other characters except letters, numbers, ". " , "-" and "_", you cannot connect a SIP call.
• Call Mode: Select a call mode.
- Audio+Video: When you make a call with audio and video.
- Audio Only: Select this option when you want to call with audio only.
• Answer Type: Select the answer type for the incoming call.
- Auto answer : The system automatically answers the incoming call.
-
Manual: You must manually answer incoming calls.
- Do not disturb me : When the system Do Not Disturb feature is enabled, the system displays the main screen. Callers hear a busy
signal and missed calls appear in the Call History. Consider using this feature, for example, if you are using the meeting room for a
purpose other than a video conference and do not wish to be disturbed by incoming calls.
• Screen Saver: When your system is idle during the selected time, it will be activated and the LG logo will be displayed on the monitor.
An incoming call or pressing any button on the remote control automatically invokes the system.
• Language: Select a language for the setup menu and information display.
• Outgoing Protocol: Select the protocol to use when attempting to outgoing Call. You can choose H.323, SIP, or Auto. If you select H.323
or SIP, you can make a call selected value. If the far site user does not enable the same protocol, you can't connect to the far site. If you
selected Auto, you are able to connect moderately with the far site setting. (H.323 is tried before the SIP. If H.323 does not connect, a SIP
call is attempted automatically.)
• Display Resolution: Select the display resolution of the connected monitor. If you change the resolution, the confirmation window is
displayed and then press OK to reboot the system. You can set the system to 720p, 480p. The default is 720p.
• Second Display: Set to ON when you use the second display for content viewer. If you use the content sharing function, the content will
be displayed from the second display device of the connected with the HDMI OUT 2 port.
Installation 29
3