LG V5000 Owner's Manual page 40

40 Installation
NOTE
When User Use EAP-MD5
If you use EAP-MD5, you do not need to upload any files in the web service.
When User Use EAP-TTLS
1. If you use EAP-TTLS, you must receive ca.pem, client.pem, client.key from the 802.1x network manager.
2. Upload the ca.pem, client.pem, client.key files to the web service of your system as shown in the picture below.
3
When User Use EAP-PEAP
1. If you use EAP- PEAP, you must receive a ca.pem file from the 802.1x network manager.
2. Upload the ca.pem file to the web service of your system as shown in the picture below.
After Setting 802.1x
1. When you finish these settings, confirm that you can see your IP on the main screen.
2. Perform a ping test in the system info > Network utility > Command.
3. You can now attempt to call other VCS.