Before Using The System - LG V5000 Owner's Manual

4 Operation

Before Using the System

• Before using the LG VCS device, make sure the connections are correct and verify that a proper power supply is used.
• Check the connections of the LG VCS device for the correct conditions.
• Check that the LG VCS device is connected to the network and power is supplied.
• Before using the VCS, make sure the network settings are correct.
• Before placing a call, examine the near end video image from the connected camera to your system. If the image flickers, colors appear
unbalanced or the image appears too dark, you may need to adjust the room lighting or camera brightness and white balance and check
the Shutter menu.
Placing a Call
You can place a call from your system to another VCS. Begin a call in one of the following ways:
Placing a Call Manually
You can place a call by entering the IP address manually.
1. Select the Text input field and press OK.
2. Enter an IP address or dial numbers.
Use [ ] to change the method of text entry for text input field.
3. After entering a value, press OK.
4. Press OK again to place a call. The call status dialog box is displayed.
The call status dialog box shows the number or IP address that you are attempting to call and the status of the call.
is selected automatically.
Operation 47
4