10
Preparation
Codec Unit Overview
a
2
b
a
Power indicator: Lights when the unit turns on.
If you use the codec unit as stand type, attach the codec unit to the codec unit stand. For more details, refer to 22 page.
b
Power input jack: Connects to a DC 12 V power supply using proper cables.
c
d
Power button: Turns the unit on or off. You must turn the unit on using the Power button after connecting the power cable. You can
use this button to reset the system.
Camera connection port: Connects the HD camera.
e
HDMI Input port: Connects the codec unit and the camera with a HDMI cable.
f
g
RGB(PC) IN port: Connects the PC with a D-sub cable for presentation.
Cooling fan.
h
HDMI OUT 1 port: Connects the codec unit and the display device with a HDMI cable for main output.
i
HDMI OUT 2 port: Connects the codec unit and the display device with a HDMI cable for contents output.
j
k
LAN port: Connects to a network via a hub with RJ-45 connector.
AUDIO IN/OUT: Connects to the external audio device.
l
Microphone jack 1: Connects a microphone.
m
n
Microphone jack 2: Connects a microphone.
LOCK: Connects the Kensington security system cable between the Codec Unit and a large object such as a desk.
o
c d
e
f
g
h
i
j
k
l
m n
o