Placing A Call From The Directory 2 - LG V5000 Owner's Manual

Placing a Call from the Directory
The directory stores a list of names and numbers from which you can place calls. To place a call from the directory, follow these steps:
1. From the main screen, press DIRECTORY on the remote control or select [Directory] on the main screen and press OK to access the
directory.
2. Use the arrow buttons to select the entry that you wish to dial.
3. Press OK to place the call. The call status dialog box is displayed.
NOTE
• Refer to the Directory setting section for more details.
• If you use the Directory function during the call, you cannot use the Add, Edit and Delete function.
Placing a Call using the Speed Dial
If you set a speed dial number, you can place a call quickly and easily. Press and hold the registered number button for a while until the call
status dialog box appears.
Answering or Rejecting a Call
You can configure your system to automatically answer incoming calls by setting preferences in [User > General > Answer Type] menu as
follows:
• Auto Answer: If you select this option, the system automatically answers the first incoming call.
• Manual: If you select this option, you must manually answer incoming calls. If your system is configured for answering calls manually,
choose one of the following options when an incoming call arrives:
- Select [Pickup] and press OK to accept the call.
- Select [Reject] and press OK to reject the call.
• Do not disturb me: If you select this option, you can block the all of the call from the other system. The "Do not disturb" message is
displayed in the middle of the top of the main screen. Missed calls appear in the Call History list. Consider using this feature, for example, if
you are using the meeting room for a purpose other than a video conference and do not wish to be disturbed by incoming calls.
NOTE
If you call to another system with the "Do not disturb" function enabled, the warning window is displayed and the call is disconnected
automatically.
Managing a Call
During a call, you can view information about the status of the call and the identity of the connected caller.
Ending a Call
You can end a call using on the remote control. Press
one or all when you end a multipoint call.
Hiding or Showing User Interface Elements
To hide or show the user interface elements at any time during a call, press
when you want to end a call. You will see a pop-up message and then select
.
l
Operation 49
4