LG V5000 Owner's Manual page 25

5-1. Select one of the below options.
• Start Wizard: Select this option when you want to set the configuration with wizard. If you select this option, follow next steps.
NOTE
It is recommended that you use the Start Wizard option rather than the Manual Setting option.
• Manual Setting: Skip the wizard configuration and display the main setup window. You can set the system configuration manually.
NOTE
If you setup incorrectly in Manual Setting, you may not be able to connect to calls.
Select [Next] and press OK to go to the next step or press
5-2.
6. Select the time zone.
] to select the time zone and press OK.
6-1. Use [ ] or [
] to select the country where the device is located and press OK.
6-2. Use [ ] or [
Select [Next] and press OK to go to the next step or press
6-3.
7. Select the one of the network setting options.
• DHCP: Select this option when a DHCP server is installed on the network to allow IP address assignment. With this setting, the IP address
is assigned automatically.
7-1. Select this option and press
.
ll
.
ll
. The IP address information window is displayed.
ll
Installation 25
3