Download
Share
Print this page
Tenda W136R Configuration Manual
  1. Manuals
  2. Brands
  3. Tenda Manuals
  4. Network Router
  5. W136R
  6. Configuration manual
Tenda W136R Configuration Manual

Tenda W136R Configuration Manual

Configure wifi router as an access point
Hide thumbs

Advertisement

Quick Links

Download this manual
Configure your Router WIFI
Tenda W136R
as an access point

Advertisement

loading
Need help?

Need help?

Do you have a question about the W136R and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tenda W136R

Summary of Contents for Tenda W136R

  • Page 1 Configure your Router WIFI Tenda W136R as an access point...
  • Page 2 1 ) Dejamos TODO con los valores de fábrica. (normalmente cuando se hace correctamente este proceso, las luces del router cambian a la vez): Fijarse lo que estaba conectado para dejarlo al final igual. - Tiene que desconectar el cable de la conexion de internet. - Antes de proceder a configurar el router, hay que asegurarse que SOLO hay 1 cable...
  • Page 3 2 ) Nex step is accessing to the router: - Computer must be configured to wired network connection with automatic IP address through DHCP (as seen on our website's tutorials). -We'll open an internet browser and we'll write this address in the address bar: “http://192.168.0.1/“.
  • Page 4 2.1) Then we click in Advanced to access the advanced settings.
  • Page 5 3) Now we're going to set up Wireless settings - Check that Wireless is enabled. - SSID is the name of your Wifi name (NOT the password). - Then press “OK” to save.
  • Page 6 3.1) On the “Wireless security” tab - Disable WPS option. - Press “OK” to save.
  • Page 7 3.2) This windows should appear. For higher security we will set: - Security Mode: Mixed WPA/WPA2 – PSK, - WPA Algorithms: TKIP&AES, - Security Key: [Your password] (At least 8 characters) - Press “OK” to save.
  • Page 8 4) UPnP: - UPnP keep it as disabled. - Press “OK” to save.
  • Page 9 4) Move back to “Advanced” tab an then to DHCP Server option - Keep “DHCP SERVER” disabled. - Press “OK” to save.
  • Page 10 4) Finally on LAN Settings, we have to introduce these parameters: - IP Address=192.168.1.2 - Subnet Mask=255.255.255.0 - Press “OK” to save. 5) Finally you have to plug EVERYTHING in it's original position...