Ports & Bottons - Tenda 4G680 User Manual

SN LED Indicator
Signal
5 strength LED
indicator
1.3.2 Ports & bottons
6 7 8
SN Port/Button
6 POWER ON/OFF
7
8 1
9 2
10
11 RESET
12 WPS
Color Status
Blinking
Red Solid on
Green (1 to 4 bars)
9 10
Description
Power on/off button. Used to turn on/off the router.
Power jack. Used to connect to the included power adapter for power supply.
LAN port. Used to connect to Ethernet devices, such as computers, switches, and
so on.
WAN/LAN port. It can server as a WAN port or a LAN port.
Telephone port. Used to connect to a telephone for voice service.
Reset button. When the WiFi LED indicator lights up, hold this button down for
about 8 seconds, and release it when the WiFi LED indicator turns off. When the
WiFi LED indicator lights up again, the router is reset to factory settings
successfully.
Press this button to start WPS negotiation.
Data is being transmitted over the WAN port.
No SIM card or no network network service.
It indicates the 3G/2G signal strength of the
router.
11 12
3
Description
13