AccuLine CNQplus 1000RT User Manual page 40

The following figures show schematic of the dry out/in contacts.
The following table shows the options for the dry out/in contacts
Dry out signal
General Alarm
On Battery
Battery Low
UPS ok
On Bypass
Dry in signal
UPS On/Off
Dry out contact schematic
Dry in contact schematic
Description
Activated when any warning happens
Activated when the UPS operates on battery
Activated when the UPS has no alarms and no
fault.
Activated when the UPS has bypass output.
Description
When the inverter is active, receiving signal via this
contact will turn off the UPS. When the inverter is
not active, receiving signal via this contact will turn
on the UPS. It is the same as using a remote
button to control UPS On/Off status.
39