Operating Modes For All Models; Line Mode - AccuLine CNQplus 1000RT User Manual

6. Operating Modes for All Models

A different string will be displayed on the LCD screen corresponding to the
UPS operating mode, all possible strings displayed are shown in the following
table. At any time, only one normal operating string or fault string is presented.
But the warning, even several warnings will appear in a certain normal
operating mode at one time. In this case, the normal operating mode string
and the warning string will be shown circularly. Once a fault occurs, then all
previous warnings will not be shown again but only the fault string will be
presented.
Normal operating mode
No output mode
Bypass mode

Line mode

Battery mode
Battery test mode
ECO mode
Converter mode
6.1 Line mode
The LCD display in Line mode is shown in the following diagram. Information
about the utility power, the battery level, the UPS output and the load level will
be displayed. The LINE string indicates that the UPS is operating in Line
mode.
In case of output overload, alarm will beep twice every second. You should get
rid of some unnecessary loads one by one to decrease the power demand at
Code
STbY
bYPA
LINE
bATT
TEST
ECO
CVCF
Line mode
24