No Output Mode; Epo (Emergency Power Off); Eco Mode (Economy Mode) - AccuLine CNQplus 1000RT User Manual

Bypass mode
The UPS does not have backup function when in bypass mode. The power
used by the load is supplied from the utility power via internal filter.

6.4 NO output mode

The LCD display in No output mode is shown in the following diagram.
Information about the utility power, the battery level, the UPS output and the
load level will be displayed. The STbY string indicates that the UPS is in No
output mode.
No output mode

6.5 EPO (Emergency Power Off)

It is also called RPO (Remote Power Off). On LCD display, the mode string
will be EPO .
It is a special status in which the UPS would shut the output off and alarm.
The UPS could not be turned off by pressing OFF button on the panel, only
after releasing EPO status by turning off the EPO switch.

6.6 ECO mode (Economy mode)

It is also called high efficiency mode. During ECO mode, the mode string will
be ECO on the LCD display.
In ECO mode, after the UPS is turned on and while the utility power is in
26