Miscellaneous; Lifting Device For The D7T Supply Module; Pull-Out Ramp For The D8T Supply Module - ABB ACS880-304 +A018 Hardware Manual

Miscellaneous

Lifting device for the D7T supply module


Use the lifting device when you remove or install a frame D7T module from or in the Rittal
TS 8 enclosure. See also section
Frame size
D7T

Pull-out ramp for the D8T supply module


Use the pull-out ramp when you remove or install a D8T module from or in the Rittal TS 8
enclosure. Do not use the ramp with plinth heights over 100 mm (3.93 in) (the standard
plinth height of Rittal TS 8 enclosures). For the dimension drawing, see section
Dimensions of the pull-out ramp for D8T module
Module size
D8T
Replacing the D7T supply module
Qty Kit code
1 A-46-67-440
Enclosure width
400 mm (15.75 in)
Ordering code
3AXD50000004182
Instruction code: 3AXD50000004591
on page 243.
Qty Kit code
1 A-468-8-304
Ordering information 211
(page 138).
Illustration
Ordering code
3AUA0000120467