Connecting A Pc To The Supply Unit - ABB ACS880-304 +A018 Hardware Manual

Electrical installation 109

Connecting a PC to the supply unit

Connect a PC to the drive with an USB data cable (USB Type A <-> USB Type Mini-B) as
follows:
1. Lift the USB connector cover on the control panel from bottom upwards.
2. Insert the USB cable Mini-B plug in the control panel USB connector (a). -> The panel
displays: USB connected (b).
3. Insert the USB cable A-plug in the USB connector of the PC.
Note: It is also possible to connect the PC through an optional diagnostics and panel
interface (FDPI). The FDPI is used for branching the panel bus and chaining a control
panel or PC tool to several drives. See FDPI-xx user manual (3AUA0000113618
[English]).
1
USB connected
?
b
Stop Loc/Rem Start
?
a
Stop Start
Loc/Rem
3