Dc Busbars; Dc Connection Flanges; Other Components And Tools - 1×D8T, 6-Pulse - ABB ACS880-304 +A018 Hardware Manual

DC busbars

DC busbars provide connection from the module DC output to the common DC bus.
Module Enclosure width
size
1×D8T 400 mm
(15.75 in)

DC connection flanges

Each diode supply module requires DC connection flanges.
Module Enclosure width
size
1×D8T 400 mm
(15.75 in)
Other components and tools – 1×D8T, 6-pulse

Component
Main switch-disconnector
AC fuses
Main contactor
Control panel and its door mounting
Ventilation kits
Brackets for Flat-PLS busbar holders (Rittal
TS 8), AC and DC busbars
RFI filters
Pull-out ramp
Qty Kit code Ordering code
1 A-4-8-209 3AXD50000004850
Qty Kit code Ordering code
1 A-468-8-230 3AXD50000002639
IEC main switch-disconnectors – 6-pulse
UL main switch-disconnectors – 6-pulse
IEC/UL main AC fuses – 6-pulse
Main contactors
Control panel
Air inlet kits for a 400 mm (15.75 in) cubicle
203
Air outlet kits for a 400 mm (15.75 in) cubicle
206
Bracket for Rittal Flat-PLS busbar holder (common
AC)
Bracket for Rittal Flat-PLS busbar holder (common
DC)
RFI filters
Pull-out ramp for the D8T supply module
Ordering information 161
Instruction code: 3AXD50000006191
Instruction code: 3AXD50000002638
See section ...
on page 194
on page 202
on page 212
on page 212
on page 213
Illustration
Illustration
on page 189
on page 189
on page 191
on page
on page
on page 211