212 Ordering information
Bracket for Rittal Flat-PLS busbar holder (common AC)
If you use the Rittal Flat-PLS system, you can use this kit for correct positioning of the
common AC bus in the Rittal TS 8 enclosure.
Note: The designs presented in this manual for Rittal TS 8 enclosures employ the Rittal
Flat-PLS busbar system. Make sure that the current carrying capability of the busbars is
not exceeded at any point of the drive system.
Module
Enclosure width
size
All
400/600/800 mm
(15.75/23.62/31.50
in)
Bracket for Rittal Flat-PLS busbar holder (common DC)
If you use the Rittal Flat-PLS system, you can use this kit for correct positioning of the
common DC bus in the Rittal TS 8 enclosure.
Note: The designs presented in this manual for Rittal TS 8 enclosures employ the Rittal
Flat-PLS busbar system. Make sure that the current carrying capability of the busbars is
not exceeded at any point of the drive system.
Module
Enclosure width
size
All
400/600/800 mm
(15.75/23.62/31.50
in)
Qty
Kit code
Ordering code
1
A-468-X-011
3AUA0000115905
Qty
Kit code
Ordering code
1
A-468-X-001 3AUA0000115906
Illustration
Instruction code: 3AUA0000115893
Illustration
Instruction code: 3AUA0000115891