Adding The Ata 190 With Cisco Unified Communications Manager Administration; Determining The Mac Address Of An Ata 190 - Cisco ATA 190 Administration Manual

Analog telephone adapter guide for sip
Hide thumbs Also See for ATA 190:
Table of Contents

Advertisement

Determining the MAC Address of an ATA 190

For mixed mode, autoregistration is automatically disabled and cannot be changed. For nonsecure mode,
Note
autoregistration is disabled by default but can be enabled manually.
Related Topics
Adding the ATA 190 with Cisco Unified Communications Manager Administration, page 2-6
Adding the ATA 190 with Cisco Unified Communications Manager
Administration
You can add the ATA 190 individually to the Cisco Unified Communications Manager database using
Cisco Unified Communications Manager Administration. To do so, first obtain the MAC address for
each device.
For information about determining a MAC address, see
page
After you have collected MAC addresses, in Cisco Unified Communications Manager Administration,
choose Device > Phone and click Add New to begin.
Note
ATA 190 has two FXS ports, and each port has its MAC address. The first ATA 190 port uses the MAC
address and the second ATA 190 port uses the shifted MAC address (example, AABBCCDDEEFF to
BBCCDDEEFF01). You can add two devices from the Unified CM administration page.
For complete instructions and conceptual information about Cisco Unified Communications Manager,
see the Cisco Unified Communications Manager Administration Guide and the Cisco Unified
Communications Manager System Guide.
Related Topics
Adding the ATA 190 with Auto-Registration, page 2-5

Determining the MAC Address of an ATA 190

Several of the procedures that are described in this document require you to determine the MAC address
of an ATA 190. You can determine the MAC address for a device in any of these ways:
Cisco ATA 190 Analog Telephone Adapter Administration Guide for SIP (Version 1.1)
2-6
2-6.
Look at the MAC label on the back of the device.
Go to Voice > Information on the web page of the device and check the MAC address.
Chapter 2
Preparing to Install the ATA 190 on Your Network
Determining the MAC Address of an ATA 190,
OL-31821-02

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents