Configuring The Ata 190 - Cisco ATA 190 Administration Manual

Configuring the ATA 190

Use Cisco Unified Communications Manager Administration to configure telephony features and assign
users.
This chapter provides an overview of these configuration and setup procedures. Cisco Unified
Communications Manager documentation provides detailed instructions for these procedures.
Telephony Features Available for the ATA 190
Table 4-1
Cisco Unified Communications Manager Administration.
Table 4-1 Telephony Features for the ATA 190
Feature Description
Audible Message A stutter tone from the handset or speakerphone indicates
Waiting Indicator that a user has one or more new voice messages on a line.
Note
cBarge Allows a user to join a nonprivate call on a shared phone
line. cBarge adds a user to a call and converts it into a
conference, allowing the user and other parties to access
conference features.
The ATA 190 supports Barge on a conference bridge.
OL-31821-02
lists the supported telephony features, many of which you configure by using
The stutter tone is line-specific. You hear it only
when using the line with the waiting messages.
Cisco ATA 190 Analog Telephone Adapter Administration Guide for SIP (Version 1.1)
4
C H A P T E R
Configuration Reference
For more information, refer to:
Cisco Unified Communications
•
Manager Administration Guide,
Message Waiting
Cisco Unified Communications
•
Manager System Guide,
Connectivity to Cisco Unified
Communications
For more information, refer to:
• Cisco Unified Communications
Manager Administration Guide,
Cisco Unified IP Phone
Configuration.
Cisco Unified Communications
•
Manager System Guide,
Unified IP Phones.
Cisco Unified Communications
•
Manager Features and Services
Guide, Barge and
Configuration.
Voice Mail
Manager.
Cisco
Privacy.
4-1