Table of Contents
Advertisement
SmartNode 5550 & 4150 Series User Manual
Introduction
The Reset button (see
figure 23
the SN5550 Reset button location) is used to do the following:
•
Reboot the SmartNode device (see section
Power LED is lit"
on page 76)
•
Erase the startup-config settings, which is followed by a SmartNode device reboot as indicated by the slow
blinking of all LEDs (see section
is lit"
on page 76)
•
Factory reset, which is followed by a device reboot as indicated by the fast blinking of all LEDs (see section
"Resetting the SmartNode device when it is operating and the Power LED is lit"
•
Troubleshoot the SmartNode device if it is not booting properly (see section
when it is initially powered off "
Introduction
on page 74 for the SN4150 Reset button location, and
"Resetting the SmartNode device when it is operating and the
"Resetting the SmartNode device when it is operating and the Power LED
on page 76)
F • Reset Button Functions
figure 24
on page 75 for
on page 76)
"Resetting the SmartNode device
73
Advertisement
Table of Contents
