Connection Diagrams - Circutor C-80 Instruction Manual

-------------- SYSTEM ANALYZER

3.2.- Connection diagrams

- Balanced three phase
connection system:
L1
L2
L3
L1 Voltage Line 1
L12/N Voltage Line 2
L3 Voltage Line 3
CP Current clamp
NOTE: The L1 and L2 voltage terminal connections take the measurement. The L3 terminal
is for checking the turn direction of the phases (1
If the phases are incorrectly connected the C-80 will display the prescribed turning
direction. (See section 3.5 Presentation of data on the display).
C-80 ----------- Page no.
- Single phase connection system:
L1
N
L1 Voltage Line
L12/N Neutral
CP Current clamp
→ →
2 3).
7