Table of Contents
Advertisement
2.1 Safety Signs
2.2 Safety Notes
Electrical installation and maintenance must be carried out by competent
electricians according to national connection rules.
The POWER BOX must be installed only by qualified technical personnel, and
only after receiving appropriate approvals, as required by the local authority
having jurisdiction.
The PowerCube 2.0 should keep a certain distance with the POWER BOX and
protected well to prevent from any collision.
It is forbidden to place explosives and combustibles, e.g. gasoline, kerosene,
oil, slab, cotton and rag, etc. around the POWER BOX.
To avoid electric shock, the input of PowerCube 2.0 and AC output of the
inverter should be shut down for at least 5min. before installation or
maintenance.
The temperature of some parts of the inverter may exceed 60℃. The inverter
shall be cooled down in order to avoid getting burnt during the maintenance.
Children should not go near the inverter.
Please do not open the external cover of the inverter without permission,
except
for
installation/maintenance procedures, someone could be injured and/or even
damage the inverter.
installation/maintenance.
Without
following
proper
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Power Box and is the answer not in the manual?