Trinabess Power Box Installation Manual page 55

ID100 BatOCD
ID101 BatSCD
ID102 BatOV
ID103 BatUV
ID104 BatOTD
ID105 BatOTC
ID106 BatUTD
ID107 BatUTC
In addition,if the Alarm light flashing while no fault report is on display,it due to
the higher ambient temperature.Please look for cause of the higher
temperature.
The PowerCube 2.0 over
current discharging
protect
Discharging short circuit
protect
PowerCube 2.0
voltage protect
PowerCube 2.0
voltage protect
PowerCube
discharging
temperature protect
PowerCube
charging
temperature protect
PowerCube
discharging
temperature protect
PowerCube 2.0
charging Low
temperature protect
ID100-ID103 is PowerCube
2.0 fault. If this fault occurs
occasionally,
minutes to see whether
the fault is rectified.
If this fault
high
frequently, please contact
technical support.
low
2.0 Battery fault.
high whether the air condition
around the equipment is
good. Or set the "max
discharging & charging
current" a little lower to
2.0
check whether the fault is
high
rectified. If the fault occurs
frequently, please contact
technical support.
2.0 Id106-id107 is PowerCube
Low 2.0 fault.
temperature
PowerCube 2.0. If the fault
occurs frequently, please
contact
support.
wait few
occurs
Check
Increase the
of the
technical