Connection Of Communication Devices (Optional); External Keypad; Technical Data For External Keypad - ABB PSE 18 Installation And Commissioning Manual

Figure 5.19: External keypad
Figure 5.20: Connection of external keypad

5.3 Connection of communication devices (optional)

5.3.1 External keypad

An external keypad for door mounting can be connected to the softstarter. A
3-meter cable including both the communication and the power supply to the
keypad makes the connection. The cable shall be connected to the external key-
pad connection at the bottom of the softstarter. See Figures 5.19 and 5.20.
The external keypad can also be used for transferring parameters from one
softstarter to another. Note that IP66 cannot be achieved when the keypad is not
mounted.
When the external keypad is used, both keypads will work in parallel, but the
softstarter built-in keypad always has the highest priority if the keys on both units
are pressed simultaneously.

5.3.1.1 Technical data for External Keypad

General data
Display
Status indicating LEDs
Ambient temperature
Standards
Environmental ratings
Softstarters Type PSE18...PSE370 Installation and commissioning manual 1SFC132057M0201
LCD type
Ready: Green
Run: Green
Proction: Yellow
Fault: Red
Storage: -40 o C to +70 o C (-40
CF).
o
o
Operation: -25 C to +60 C (-13
o
o
+140 F).
IEC/EN 60947-4-2
UL508
CSA C22.2 No 14
IP66
UL Type 1, 4X Indoor, 12
o F to 158
o
F to
Chapter 5 41