Ready
Run
Exit
Figure 6.3: Locking/unlocking the keypad
Ready
Run
Protection
Exit
Figure 6.4: Reset of tripping events
Protection
Fault
6.1.3 Locking/unlocking the keypad
1. Press the Exit key to exit to the Information Level.
2. The keypad is unlocked if the middle row is not indicating the lock icon
3. Press both Navigation keys 4 seconds to lock the keypad, and protect all
4. The keypad is locked if the a padlock is present on the middle row.
5. Press both Navigation keys 2 seconds to unlock the keypad, and allow
Select
Reset
6.1.4 Reset of all settings
How to reset all the changed parameters back to user default settings is de-
scribed in chapter 7.7.1.
Fault
6.1.5 Reset of tripping events
The Select/Reset key can be used to reset tripping events via the keypad, see
figure 6.4. For details about resetting of tripping events, see chapter 7.6.
Select
Reset
Softstarters Type PSE18...PSE370 Installation and commissioning manual 1SFC132057M0201
to the right.
parameter settings from unintentional change from the keypad. See figure 6.3.
changes of the parameter settings.
Chapter 6
49