Non-Siemens Distribution Board Connection Units - Siemens SIVACON 8PS Configuration Manual

Product selection
4.3 Selection tables
4.3.3.3

Non-Siemens distribution board connection units

Note
Use in distribution systems
When using busbar connection units for non-Siemens distribution boards, you must ensure
that the permissible limit temperature of 135 °C for the busbars is not exceeded at an
ambient temperature of 35 °C averaged over 24 hours.
The rated currents specified in the table apply for the limit temperature of 135 °C.
The short-circuit resistance of the busbar connection units for non-Siemens distribution
boards depends on the copper-plating of the remaining distribution system.
Straight busbar connection units for non-Siemens distribution boards
1)
Non-Siemens distribution board connection units, connection elbow left
1)
2)
*
56
See type code 1
System
LX.01 to LX.10
See type code 1
Shorter lengths on request
Complete type with relevant dimensions (e.g. LX....-FLL-X0.70/Y0.53)
Type
1)
LX.....-FA
Length X Length Y
[m] [m]
0.35 ...0.70 0.22...0.55
2)
SIVACON 8PS - Configuring with LX system
Configuration Manual, 10/2011, A5E02194899-02
Type
1)
LX.....-FLL-X*/Y*