Product Selection; Instructions On Product Selection - Siemens SIVACON 8PS Configuration Manual

Product selection

4.1

Instructions on product selection

Please observe the following when selecting and ordering:
Metal supplements
In calculating the price, metal supplements are added to the list prices depending on current
official prices and the relevant metal factor.
Dimensions
Lengths in the selection lists are specified in meters (m). Optional dimensions can be
selected in increments of 0.01 m.
Type
All types marked with * must be completed with the relevant dimensions. If necessary, add
the type suffix.
Type suffix
Always specify the type suffix for flange plate, phase sequence, etc., together with the type.
Type code
You will find the LXA/LXC type code under Basic type code (Page 28). These type codes
must be transferred to the selection lists when selecting the type. For some components, the
type code is found on the selection list itself: for example, in the case of tap-off units,
incoming cable connection units, and accessories.
Legend
Dimension
AD
D
L
W
X
Y
Z
SIVACON 8PS - Configuring with LX system
Configuration Manual, 10/2011, A5E02194899-02
Meaning
Distance between tap-off point centre and joint block centre
Length of expansion compensation unit [m]
Standard length
Optional length
Length X dimension
Length Y dimension
Length Z dimension
4
27