Computer Setup-Uefi Drivers; Recovering The Configuration Settings - HP Z1 Entry Tower G5 Maintenance And Service Manual

Table 5-3 Computer Setup—Advanced (for advanced users) (continued)
Option
Computer Setup—UEFI Drivers
Lets you restart the computer into the 3rd Party Option ROM Management application. You can start this
application directly by pressing

Recovering the Configuration Settings

This method of recovery requires that you first perform the Save to Removable Media command with the
Computer Setup (F10) Utility before Restore is needed. (See
Computer Setup—File table.)
The Save to Removable Media option creates a file named HPSETUP.TXT on an inserted USB flash media
device. This file can be edited to change the settings on Restore. An asterisk (*) marks the selected option for
a setting.
NOTE: It is recommended that you save any modified computer configuration settings to a USB flash media
device and save the device for possible future use.
To restore the configuration, insert the USB flash media device with the saved configuration and perform the
Restore from Removable Media command with the Computer Setup (F10) Utility. (See
on page 71 in the Computer Setup—File table.)
Heading
CIRA is Customer Initiated Remote Assistance, an Intel service to help users employing Active
Management Technology (AMT).
F3 during startup.
Computer Setup–Main on page 71
Recovering the Configuration Settings
in the
Computer Setup–Main
81