4.7.2
Parameters of the Analog Output Modules
The analog output modules use a subset of the parameters and ranges of values
listed in the table below, depending on the functionality. Refer to the section on the
module concerned, starting from Section 4.28, for the subset "mastered" by the
specific analog modules.
The default settings apply if you have not performed parameter assignment in
STEP 7.
Table 4-42 Parameters of the Analog Output Modules
Parameter
Enable
•
Diagnostic
interrupt
Diagnostics
•
Group diagnostics
Output
•
Output type
•
Output range
Response with
CPU-STOP
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
Value Range
Yes/no
Yes/no
Deactivated
Voltage
Current
For the settable measuring ranges of the
output channels, please refer to the
individual module description.
ASS
Outputs de-energized
LWH
Hold last value
EWS
Apply substitute value
Analog Modules
Default
Para-
Settings
meter Type
No
Dynamic
No
Static
U
Dynamic
"10 V
ASS
Dynamic
Scope
Module
Channel
Channel
Channel
4-43