Analog Modules
2. Insert the measuring range module (correctly positioned (1)) into the analog
input module.
The measuring range selected is the one that points to marker point on
module (2).
Figure 4-2
Perform the same steps for all other measuring range modules.
The next step is to install the module.
Caution
!
If you have not set the measuring range modules correctly, the module may be
destroyed.
Make sure that the measuring range module is in the correct position before
connecting a sensor to the module.
4-30
Inserting Measuring Range Modules into the Analog Input Module
1
2
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03