Assigning Parameters To The Sm 327; Di 8/Dx 8 X Vdc 24/0.5 A - Siemens SIMATIC S7-300 Reference Manual

3.33.1

Assigning Parameters to the SM 327; DI 8/DX 8 x VDC 24/0.5 A

Parameter assignment
You will find a description of the general procedure for assigning parameters to
digital modules in Section 3.3.
Parameters of the SM 327; DI 8/DX 8 x DC 24 V/0.5 A, parameterizable
You will find an overview of the parameters that you can set and their default
settings for the SM 327; DI 8/DX 8 x VDC 24/0.5 A in the table below.
The default settings apply if you have not performed parameter assignment in
STEP 7.
You will see which parameters you can modify from the list:
• In STEP 7
• With SFC 55 "WR_PARM"
• with SFB 53 "WRREC" (e. g. for GSD).
The parameters set with STEP 7 can also be transferred with SFCs 56 and 57 and
the SFB 53 to the module (refer to the STEP 7 manuals).
Table 3-28 Parameters of the SM 327; DI 8/DX 8
Parameter
Range
Digital output Yes/no
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
Value Default Parameter
Settings
No
VDC 24/0.5 A
Scope
Type
Dynamic Channel
Digital Modules
Data Parameters can be
Record assigned with ...
No. No.
SFC 55, Program
SFB 53
1 Yes
ming
device
Yes
3-119