Table of Contents
Advertisement
Previous view
2
Section
Programmable key functions
You can assign the functions described below to
[Top], [Upper], and [Lower] by using the CS-F29DR2
programming software
Ask your dealer for details.
NOTE: Refer to the instruction manual that comes
with the transceiver for the default settings of these
keys.
Null
No function is assigned.
ZONE
z Push to select a desired Zone.
z Hold down to announce the current Zone number.
L The Zone number is announced when selecting a
Zone, regardless of the Channel Announce setting.
SCAN
NOTE: Select the channels to be scanned by using
CS-F29DR2
programming software
z Push to start or pause a scan.
L When a scan is started with the Power ON Scan or the
Automatic scan function, push this key to pause the
scan. The paused scan resumes after a set time period.
z Hold down this key while a scan is paused, and
then the channel is removed from the scan group.
L The removed channel is automatically added to the
scan group again, after the scan is canceled.
MONI
While holding down this key, the C.Tone* mute is
released, even if the received signal does not include
a matching C.Tone*.
* CTCSS tone or DTCS code
PROGRAMMABLE KEY FUNCTIONS
(purchase separately).
.
[Rotary Selector]
[PTT]
[Upper]
[Lower]
LOCK
Hold down to turn the Key Lock function ON or OFF.
L Even when the Key Lock function is ON, [PTT], [MONI],
[LOCK], [CALL], [CLEAR], [SURVEILLANCE], and
[SIREN] are not locked.
CALL // only on a Digital channel //
Push to make a call that includes a Common ID.
CLEAR // only on a Digital channel //
P ushtofinishacommunicationbysendingaclear
down signal. After the other station receives the clear
down signal, the transceiver automatically enters the
Stand-by mode.
BREAK // only on a Digital channel //
z Hold down to send a Break-in request call.
L The Break-in request call announces to the other
stations on the channel that the user wants to break
into the current communication in the group. The
transceiver waits for the current communication to
end. After the communication ends, the transceiver
automatically sends the call.
z While waiting, push this key to cancel the Break-in
request call.
S-RING/C-RING
// only on an Analog channel //
Push to make a Smart-Ring call.
// on both an Analog and a Digital channel //
Hold down to make a Call-Ring call.
3
[VOL]
[Top]
Advertisement
Table of Contents
