Table of Contents
Advertisement
Previous view
4
SETTINGS
Setting the Call-Ring oingeo
The Call-Ring ringer sounds only when the user holds
down [S-Ring/C-Ring] to make a call.
NOTE: Turn ON the Beep function (p. 7) before
you start setting the Call-Ring ringer.
1. Rotate [VOL] to turn OFF the transceiver.
2. Set [Rotary Selector] to any channel other than
Channel 16.
3. While holding down [PTT] and [Lower], rotate
[VOL] to turn ON the transceiver and enter the
Call-Ring ringer setting mode.
• The current Call-Ring ringer sounds.
4. Rotate [Rotary Selector] to select a desired Call-
Ring ringer.
• The selected Call-Ring ringer sounds.
5. Rotate [VOL] to turn OFF the transceiver and exit
the Call-Ring ringer setting mode.
[Rotary Selector]
[PTT]
[Lower]
9
[VOL]
Advertisement
Table of Contents
