Installation - CDA SC020 Use And Maintenance

Built-in multifunction oven
Table of Contents

Advertisement

Installation

The installation and technical assistance must only be performed by
qualified staff.
Carefully read the safety instructions in this manual before using the
oven. Incorrect installation, maintenance, assistance and use can
cause serious damage/injury to persons or objects.
This product must be installed as instructed in this manual and in
compliance with National Standards and local regulations in force.
Do not lift or pull the oven from the door handle and do not force
or load weights when this is open. The purchaser is responsible for
installation. Assistance provided by the manufacturer due to incorrect
installation is excluded from the warranty.
Features of the cabinet
The kitchen area should be dry, aired and equipped with efficient
ventilation
When installing the oven, ensure there is access to all control
elements
The cabinet and its components must be able to withstand
temperatures of up to 90 °C without presenting deformities and/ or
surface defects
The cabinet must enable the free passage of the mains electrical
cables
Hoods should be installed according to the manufacturer's
instructions
Inserting the oven in the cabinet
Make an opening with the dimensions given in the diagram for the
oven to be fitted
Make sure the mains plug is disconnected and then connect the
oven to the mains supply
Instruction Manual | 21

Advertisement

Table of Contents
loading

Table of Contents