Save & Exit Setup Menu - Kontron 3.5-SBC-APL User Manual

Function
SATA Support
VGA Support
USB Support
PS2 Devices Support
Network Stack Driver Support
Redirection Support
New Boot Option Policy
8.7. Save & Exit Setup Menu
The Save & Exit Setup menu provides functions for handling changes made to the UEFI BIOS settings and the exiting
of the Setup program.
Table 13: Save & Exit Setup Menu Functions
Function
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Changes
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Default
UEFI: Built-in EFI Shell
Launch EFI Shell from
filesystem device
www.kontron.com
Description
time during boot.
Select Last Boot HDD only or All Sata Devices
If Auto, only install Legacy OpRom with Legacy OS and logo would NOT
be shown during post. Efi driver will still be installed with EFI OS.
If disabled, all USB devices will NOT be available until after OS boot. If
Partial Initial, USB Mass Storage and specific USB port/device will NOT
be available before OS boot. If Enabled, all USB devices will be available
in OS and Post.
If disabled, PS2 devices will be skipped
If disabled, Network Stack Driver will be skipped
If disabled, Redirection function will be disabled
Controls the placement of newly detected UEFI boot options
Description
Exit system setup after saving the changes
Exit system setup without saving any changes
Reset the system after saving the changes
Reset system setup without saving any changes
Save changes done so far to any of the setup option
Discard changes done so far to any of the setup option
Restore/Load Default values for all the setup option
Save the changes done so far as User Defaults
Restore the User defaults to all the setup option
Go to UEFI shell
Attempts to Launch EFI Shell application (Shell.efi) from one of the available
filesystem devices
3.5-SBC-APL – Rev. 0.1
// 46