Section 1 Product Overview; Operation; Functionality; Recommended Cybersecurity Practices - Honeywell Notifier NFN-GW-EM-3 Installation And Operation Manual

1.1 Operation

The NFN-GW-EM-3 serves as a bridge between an ONYXWorks
Control Panels (FACPs), NFN network, or high-speed NFN network.
The web portal feature serves as a bridge between eVance

1.2 Functionality

The NFN-GW-EM-3 translates the protocols and facilitates communications between an ONYXWorks Workstation or ONYX
FirstVision and the connected FACPs, NFN network, or high-speed NFN network; to protocols used by the workstation or FirstVision.
The web portal feature transmits network events and system information between eVance and the connected FACPs, NFN network, or
high-speed NFN network. This information is used for maintenance purposes only.

1.3 Recommended Cybersecurity Practices

Highly recommended cybersecurity practices for the NFN-GW-EM-3 are specified in the Cybersecurity Manual (LS10217-000NF-E).
CAUTION: CYBERSECURITY RISK
!
FAILURE TO COMPLY WITH THE RECOMMENDED SECURITY PRACTICES MAY PLACE YOUR SYSTEM
AT RISK.

1.4 Required Software

TM
Chrome is required for use with the NFN-GW-EM-3.

1.5 Environmental Requirements

This product meets the following requirements for operation:
• Temperature - 0°C to 49°C (32°F - 120°F)
• Relative Humidity - 93 ±2% non-condensing at 32 ±2°C (90 ±3°F)
However, it is recommended that this product be installed in an environment with a normal room temperature of 15-27º C (60-80º F).

1.6 System Architecture

An Internet or Intranet IP network connection is used with the architectures described in
Workstation
NFN-GW-EM-3 Installation and Operation Manual — P/N LS10017-000NF-E:D1 5/1/2019

Section 1 Product Overview

IP Network
Ethernet
Figure 1.1 Direct Panel Architecture
®
Workstation or ONYX
®
and the connected FACPs, NFN network, or high-speed NFN network.
Ethernet
NFN-GW-EM-3
® ™
FirstVision and the connected Fire Alarm
Figures 1.1, 1.2, and 1.3.
NUP
Connection
FACP
7