Software Updates - Honeywell Lyric LCP300-L User Reference Manual

9. Press OK and Save.
10. Press  to return to the previous screen.
Join a WPS Network
1. On the Gateway, have the list of Wi-Fi options ready. Don't press any buttons yet.
2. Press the WPS button on the access point device or router.
3. On the list of Wi-Fi options, press WPS. The
displays "Please Stand by for WPS Operation".
4. If the operation is successful, the
"Device has been successfully added to the network".
5. Press OK.
If the operation is not successful, the
Operation. Device not added to the network. Press OK.
Automatic/Manual Video Recovery
If video from remote cameras is lost or becomes distorted, the system can attempt to reset
video streaming. By default, Gateway automatically begins to recover video about 60
seconds after Wi-Fi communication has been restored.
The default setting is automatic video recovery. You may set recovery to begin only by user
intervention.
• On the list of Wi-Fi options, toggle between Automatic Video Recovery and Manual
Video Recovery.
• Press  to return to the Tools menu.

Software Updates

Home > Security > Tools > Advanced
Lyric Gateway
Software updates for the
permission in an on-screen window. Press Accept, Yes or OK to install the update.
Certain critical updates are installed automatically. After updates of this type, information
about the update is displayed on-screen.
You can see the current version of the Gateway's software at
System Information.
After a new SiX™ series sensor or key fob is enrolled in your system, the new
device's software should be updated. This ensures that you are using the most
Sensor Firmware
Normally, SiX™ Series sensors in your system are updated when the Gateway's software is
updated.
To initiate sensor firmware update manually:
1. On the Advanced menu, press Update Sensor Firmware.
2. Press Start and follow the instructions on the screen.
3. Press Stop when the update is complete.
4. Press  to return to the Advanced menu.
Key Fob Firmware
Controller / MyHome Gateway or TC
Controller / MyHome Gateway or TC
Gateway are published periodically. Some updates request user
IMPORTANT
up-to-date version of the software.
(Wireless Keys)
44
Controller / MyHome Gateway or TC
Security > Tools > Advanced >
displays
displays Failed