Activating/Deactivating Signal Sounds Forwarding Events To The Alarm Output; Settings For Live Surveillance: Camera Name, Image, Time Display; Masking Image Areas; Setting The Motion Detection Feature - Monacor IOR-204 Instruction Manual

7.9 Activating/Deactivating signal sounds
Forwarding events to the alarm output
When the following events occur, the internal alarm buzzer may
sound and the alarm relay may respond [output ALARM
or OUT (17) can be loaded with 30 V (⎓), 1 A]. The duration
2
of the alarm sound and the response of the relay can be set
via the corresponding menus and the menu items "Buzzer"
and "Alarm Out".
Event
Alarm triggered via
the inputs SENSOR (12) or
1
ALARM 1 – 16 (17)
2
Motion in the image
Disk full
Write error on disk
Video signal interrupted
7.10 Settings for live surveillance:
Camera name, image, time display
Call up the menu "Parameter", click the submenu "Display"
and then click the section "Live".
Parameter Record Search Device
Display
Channel CH1
IP Channels
Channel Name Camera
Show Name Enable
Live
Record Time Enable
Output
Date Format MM/DD/YYYY
Image Control
Time Format 24 Hour
Privacy Zone
Refresh Rate 50 Hz
OSD Position
Setup
Record
Color
Setup
Capture
Network
Alarm
Fig. 7-27 Menu for live surveillance
Menu item Function
Channel To select the camera channel
To enter the channel name
Channel Name
(e. g. storeroom, checkout area, parking area)
Show Name To show the camera name
To show the date and the time of the recording
Record Time
during replay
Date Format
Format of the date
Time Format 24-hour format or 12-hour format
Refresh Rate
50 Hz (PAL) or 60 Hz (NTSC)
To move the position of the camera name and the
OSD Position time display (with left mouse button pressed; to
terminate the setting: press right mouse button)
To call up a window for making image settings
Color
(colour, brightness, etc.)
Save To save the setting
Cancel To exit the menu
(12)
1
Menu path
Parameter  Alarm  Alarm
also see chapter 7.8
Parameter  Alarm  Motion
also see chapter 7.12
Advanced  Events  Event Type:
No Space on Disk
Advanced  Events  Event Type:
Disk Error
Advanced  Events  Event Type:
Video Loss
i
System Advance Shutdown
Save Cancel

7.11 Masking image areas

It is possible to mask specific areas of the image that shall not
be visible (e. g. public ways or places): Each camera image can
be masked with four different black squares. Call up the menu
"Parameter", click the submenu "Display" and then click the
section "Privacy Zone".
Parameter Record Search Device
Display
Channel CH1
IP Channels
Mask Area Disable
Live
Area Setup 1
Output
Mask Area Setup
Image Control
Privacy Zone
Record
Capture
Network
Alarm
Fig. 7-28 Menu to mask image areas
Menu item Function
Channel To select the camera channel
Mask Area Set to "Enable" to define the areas to be masked
Area Setup To define a mask, click the appropriate number
1. Click Setup
selected.
2. To move a mask: keep the left mouse button
pressed.
Mask Area
3. To change the size: with the mouse pointer at
the lower right mask corner, keep the left mouse
button pressed.
4. To go back to the menu: click the camera image
with the right mouse button.
Save To save the setting
Cancel To exit the menu

7.12 Setting the motion detection feature

Cameras equipped with a motion detection feature will inter-
pret any changes in the image as motion which can trigger
different kinds of actions. Changes in the image caused by
animals, clouds, cars, flying leaves and other objects will also
be recognized as motion even though they are not supposed
to trigger any action; therefore, the settings for the motion
detection feature must be made with great care. If there are
many false alarms, change the settings accordingly or disable
the motion detection feature.
Call up the menu "Parameter", click the submenu "Alarm"
and then click the section "Motion".
Parameter Record Search Device
Display
Channel CH1
Record
Enable Enable
Sensitivity 3
Capture
Area Setup
Network
Post Recording 30 s
Alarm
Alarm Out
Motion
Show Message Send Email
Alarm
Record Channel
1 2 3 4
PTZ Linkage
Fig. 7-29 Menü für die Bewegungserkennung
i
System Advanced Shutdown
2 3 4
Save Cancel
to switch to the camera image
i
System Advance Shutdown
Buzzer Disable
Latch Time 10 s
Full Screen
Save Cancel
45