Removing A 2.5 Inch Disk; Removing A 3.5 Inch Disk - HP 3PAR StoreServ 7000 Service Manual

Removing a 2.5 inch Disk

1. Pinch the handle latch to release the handle into open position.
2. Pull the handle away from the enclosure and wait 30 seconds.
3. Gently slide the disk drive out of the enclosure and set aside.
4. Remove the replacement disk drive from its packaging. To reinstall a new disk drive, see
"Installing a Disk Drive" (page
Figure 6 Removing a 2.5 inch disk drive
Figure 7 (page 11)
Figure 7 SFF Drive Enclosure Installation Order

Removing a 3.5 inch Disk

To remove a 3.5 inch disk drive:
1. Pinch the latch in the handle towards the hinge to release the handle.
2. Gently pull the disk drive one inch and wait 30 seconds.
3. Slide the disk drive out of the enclosure and set aside.
4. To reinstall a new disk drive, see
13).
shows the installation order for disk drives in an SFF drive enclosure.
"Installing a Disk Drive" (page 13).
Disk Drive Repair 1 1