HP 3PAR StoreServ 7000 Service Manual page 40

yes
22. Answering no here returns you to step 6.
NOTE:
the 3PAR Connection Portal.
23. Set the time zone for the operating site:
a. Select a country from the list, type the corresponding number, and then press ENTER.
b. Select a continent or ocean, type the corresponding number, and then press ENTER.
c. Select a country from the regional list, type the corresponding number, and then press
ENTER.
d. Select a time zone region, type the corresponding number, and then press ENTER.
24. Verify the time zone setting is correct, then type 1 and press ENTER. Choosing option 2 restarts
the time zone configuration.
NOTE:
instructions on the screen for appending the command to make the time zone change
permanent.
25. Press ENTER to accept the default date in brackets or type the current date in MM/DD/YYYY
format and then press ENTER.
Basic Date and Time
Please enter the current date in MM/DD/YYYY format [<current date>] : [enter]
26. Press ENTER to accept the default time indicated by the installation script or type the current
time in HH:MM format.
Basic Date and Time
Please enter the time in HH:MM format [<Time>]: [enter]
27. Type yes and press ENTER to verify the date and time indicated in steps 25 and 26.
Basic Date and Time
The date and time you entered is <current date> and <time>
Is this Correct? (yes or no)
yes
40 Installing Storage Software Manually
NTP system address: <NTP.system.address> or none
Data Transfer media:
Remote Operations media:
Connection Portal: <3PAR default portal> or <system_name>
Is this data correct? (yes or no)? [yes]
The connection system IP and router number appear only when you are not using
The system automatically makes the time zone change permanent. Disregard the
Enter Control-C at any time to abort this process
Enter Control-C at any time to abort this process
Enter Control-C at any time to abort this process
ETHERNET
ETHERNET