HP 3PAR StoreServ 7000 Service Manual page 45

- Remote access:
Is this data correct? (yes or no)? [yes]
y
16. Type the static hostname or IP address assigned to the 3PAR Secure Service Policy Manager.
Please enter the hostname or I/P address of the 3PAR Secure Service Policy Manager
[?]:
<static.IP.address>
17. Press ENTER to accept the default port number or type the port number assigned to the hostname
or IP address of the 3PAR Secure Service Policy Manager.
Please enter the port number on which to contact <static.IP.address> [default]:
[XXXX]
18. Type no to not allow a proxy system to connect to the hostname or IP address of 3PAR Secure
Service Policy Manager and press ENTER. If you answered no, skip to step 25.
Type yes to allow a proxy system to connect to the hostname or IP address of 3PAR Secure
Service Policy Manager, press ENTER, and continue with step 19.
Will a proxy system be required to connect to <static.IP.address>? (yes or no)
[no]:
no
19. Type http to assign the type of proxy system and press ENTER.
What type of proxy system will be used? (http or socks) [http]:
http
20. Type the hostname or IP address of the http proxy system and press ENTER.
Please enter the hostname or I/P address of the http proxy system [?]:
<static.IP.address>
21. Press ENTER to accept the default port number or type the port number of the http proxy system
and press ENTER.
What port number should be used on the http proxy system? [default]:
[XXXX]
22. Type no to not allow proxy authentication and press ENTER. If you selected no, skip to step
26.
Type yes and press ENTER to allow proxy authentication.
Will proxy authentication (id/password) be used? (yes or no) [no]:
yes
Allowed
Manually Setting up the Service Processor 45