HP 3PAR StoreServ 7000 Service Manual page 54

19. Type the external NTP system address (if available) and press ENTER. If unavailable, type
none and press ENTER.
SP Network Parameters
<NTP.system.address>
20. Press ENTER or type yes and press ENTER to verify the network information you have supplied.
Screen content varies according to the setup options you have chosen.
SP Network Parameters
The Host Name is: <spname>
The IP address entered is: <static.IP.address>
The Netmask entered is: <subnet.mask.address>
The default gateway is: <default.gateway.address>
NTP system address: <NTP.system.address>
Data Transfer media: ETHERNET
Remote Operations media: MODEM
Connection system <3PAR default system> OR <system_name>
IP: <PPPD.system.IP>
Router: <phone_number>
The SP local number is: <splocalnumber>
Is this data correct? (yes or no)? [yes]
[enter]
Answering no here returns you to step 6.
NOTE:
the 3PAR Connection system.
21. Set up the time zone for the operating site:
a. Select a country from the list, type the corresponding number, then press ENTER.
b. Select a continent or ocean, type the corresponding number, then press ENTER.
c. Select a country from the regional list, type the corresponding number, then press ENTER.
d. Select a time zone from the list, type the corresponding number, then press ENTER.
22. Verify the time zone setting is correct, then type 1 and press ENTER. Choosing option 2 restarts
the time zone configuration.
NOTE:
the screen for appending the command to make the time zone change permanent.
23. Press ENTER to accept the default date in brackets, or type the current date in MM/DD/YYYY
format and press ENTER.
Basic Date and Time
Please enter the current date in MM/DD/YYYY format [<current date>] :
[enter]
54 Installing Storage Software Manually
Enter Control-C at any time to abort this process
Enter the IP address of an external NTP system
Enter Control-C at any time to abort this process
The dialup prefix is: <prefix>
The connection system IP and router number appear only when you are not using
The system makes the time zone change permanent. Disregard the instructions on
Enter Control-C at any time to abort this process