HP 3PAR StoreServ 7000 Service Manual page 38

1 1. Type yes and press ENTER to allow inbound and/or outbound files transfers.
Will this ethernet interface be used for inbound and/or
yes
12. To prohibit remote control of the SP, type no and press ENTER, then skip to step 14.
SP Network Parameters
Will this SP be allowed to be remotely controlled (yes or no)? [yes]
Portal)
yes
13. To use the customer network to access the SP from a remote location, type e and press ENTER.
Which media will be used for Remote Operations ( ethernet or modem )?
e
14. To use the 3PAR Connection Portal, type yes or press ENTER, and skip to step 16.
To assign an alternate connection system, type no, press ENTER and continue with step 15.
SP Network Parameters
Will this SP use the 3PAR Connection Portal? ( yes or no ) [yes]
yes
15. If you answered no in step 14, type the hostname for the alternative connection system and
press ENTER.
SP Network Parameters
Please enter the fully qualified hostname for the Connection system
(use only alpha numeric or . - _)
- or -
QUIT to abort
<system_name.company.com>
16. If the connection portal (CP) does not require connection to a proxy services, type no and
press ENTER. If you answered no, skip to step 19.
If the connection portal (CP) requires connection to a proxy service, type yes and press ENTER.
SP Network Parameters
38 Installing Storage Software Manually
outbound files transfers (yes or no) [no]?
Enter Control-C at any time to abort this process
(Replying 'yes' will allow Remote Operations sessions from a Connection
Enter 'e' or 'm' [modem]
Enter Control-C at any time to abort this process
Enter Control-C at any time to abort this process
Enter Control-C at any time to abort this process