Freedom Inverter Operation
Display Panel Operation
The Freedom Xi features a display panel with three-digit LED
display to show inverter, AC source, and battery status information.
1
3
4
Feature
Description
1
Inverter Power button
•
Press and hold for one second to turn the Freedom Xi's
inverter operation ON or OFF (when AC Shore Power is
NOT present).
•
Press and hold for five seconds to adjust feature settings.
Go back to page 8 for instructions.
975-0754-01-01
2
See NOTE in Feature # 4.
Feature
Description
2
Three-digit LED display screen shows status information
and detected fault codes. Upon startup, the screen shows the
display board (.) and main board (.) firmware
versions.
3
Status LED Indicates the mode of operation with a three-
color LED.
•
Green pertains to Utility status.
•
Solid indicates the Freedom Xi is in shore power
mode.
•
Yellow pertains to Battery status.
•
Solid indicates the Freedom Xi is in inverter operation
and using the battery to provide AC power.
•
Flashing indicates the Freedom Xi is in inverter
operation but AC shore power is detected thus
transferring to shore power mode within 20 seconds.
•
Red indicates that an Error condition has been detected
and the Freedom Xi has shut down. See "Troubleshooting
Reference" on page 26.
11